HWAMDABucket-body mold
Share the bucket drawing, sample or clear photos and identify the exact body requirement.
PAINT BUCKET MOLD SUPPLY & MATCHING
Paint Bucket Mold Solutions
Configure a paint bucket mold around the required bucket or lid design, production target and injection molding machine. Share your product requirements for a mold quotation or a complete production project review.
Bucket-body and lid mold projects · Mold-only and complete-project enquiries welcome
DEFINE THE TOOLING REQUEST
Choose the tooling scope for your paint bucket project
Configure a bucket-body mold, a lid mold or both tools as one coordinated project. Related production requirements can be reviewed at the same time.
REQUESTED TOOLING
LIDBUCKET BODY
Non-dimensional project-scope illustrationLid mold
Provide the lid design and the required fit with the bucket body.
Both body and lid
Coordinate the specifications, fit and acceptance basis for both tools.
Other project requirements
Add handle-related tooling, IML or other production equipment to the project review.
PAINT BUCKET MOLD RANGE
Capacity series from 10L to 33L
Use bucket capacity to identify the starting series, then configure the mold around the actual product drawing, material, output target and matched injection molding machine.
0110 L
0215 L
0318 L
0420 L
0522 L
0625 L
0730 L
0833 L
Tooling scope
Bucket-body mold
Bucket-lid mold
Bucket body + lid project
Bucket format
Round paint bucket
Square chemical bucket
Stackable bucket design
Material
PP bucket project
HDPE bucket project
Material grade confirmed for the part
Production configuration
Standard take-out or IML project
Single-cavity or multi-cavity review
Cold-runner or hot-runner review
PROJECT-SPECIFIC PARAMETERS
Final specifications follow the bucket design and production target
These values are confirmed during engineering review rather than assigned from bucket capacity alone.
Product dimensions and wall sectionsCavity countMold steel and hardnessRunner and gate configurationMold dimensions and weightMachine and injection requirementsTarget cycle and mold lifeTrial and acceptance requirements
PRODUCT REQUIREMENTS
Send what you know before the mold quotation
Not all specifications are available yet? Send what you have and describe your project. Unknown values can remain open until they are reviewed.
01Product drawing, photos or sample information
02Capacity and outside dimensions, if known
03Actual molded weight and material grade
04Bucket-body and lid fit requirements
05Wall, appearance, stacking or use requirements
06Target output, IML interest and existing machine data
Not all specifications are available yet? Send what you have and describe your project.
MACHINE–MOLD COMPATIBILITY
Review the actual machine interface—not bucket capacity alone
Compatibility is confirmed against the product, mold and current machine specifications. A machine brand, tonnage or bucket capacity by itself does not confirm fit.
Existing machine
Send the model and available platen, tie-bar, opening, ejector, injection-unit, controls and utility information.
Machine not selected
The product, mold request and production target can be reviewed before a machine configuration is discussed.
PROJECT DATA REVIEW
Product dataMold requestMachine dataEngineering confirmation
Mold envelope and mounting footprint
Mold thickness, opening and daylight
Complete shot and injection requirement
Ejector and mold actions
Cooling and utility connections
Take-out or IML interfaces
PROJECT CONFIRMATION
Confirm the mold configuration before production
Product data, mold configuration, machine fit, trial requirements and delivery scope are reviewed together for each paint bucket mold project.
Approved requirements
Confirm the product information, drawings and revision that govern the project.
Mold configuration
Review the requested bucket body, mold interfaces and project options.
Machine fit
Check the mold envelope, injection requirement, mounting and utility interfaces.
Trial review
Define the product and production conditions to be reviewed during the mold trial.
Acceptance reference
Record the approved sample and agreed project requirements for acceptance.
Delivery preparation
Confirm documentation, logistics and production handover requirements.
20L BUCKET-BODY MOLD
Core, cavity and machine-fit views
Review the 20L bucket-body mold from multiple working angles, including the mold face and its installed position on the injection molding machine.
PAINT BUCKET MOLD QUOTATION
Request the mold scope you actually need
Mold-only orders are welcome. The quotation should identify the requested tooling, related equipment or services, machine-matching review and any sample, trial, acceptance or logistics arrangement.
Mold only, mold + machine and complete-project enquiries are separated
Bucket-body and lid requests are selected individually
Existing-machine details are optional at the first enquiry
Drawings, photos or machine data can be attached to the enquiry
BUYER QUESTIONS
Paint bucket mold FAQ
Can I request a paint bucket mold without buying a machine?
Yes. Mold-only enquiries are welcome. You can also discuss a machine-and-mold or complete production project, depending on your requirements.
Can HWAMDA coordinate the mold with the machine?
Yes. Share the product requirements and available machine information. HWAMDA can review the machine–mold interface and define the project scope in the quotation.
What information is needed for a quotation?
Please share the product drawing or available photos, your requirements and any existing machine details. If some specifications are not yet available, send what you know so the remaining requirements can be clarified.
Can the mold be matched with my existing machine?
Please provide the current machine specifications and relevant product or mold information. Compatibility must be reviewed for the specific project before it can be confirmed.
What paint bucket mold capacities can be discussed?
The current project range covers 10L, 15L, 18L, 20L, 22L, 25L, 30L and 33L bucket formats. Final dimensions and mold configuration follow the actual product drawing.
Can I request a round or square paint bucket mold?
Yes. Round paint buckets and square chemical bucket projects can be reviewed from the product drawing, material and production requirements.
Can the bucket-body mold and lid mold be supplied together?
Yes. Specify whether you need the bucket-body mold, the lid mold or both so the tooling and fit requirements can be reviewed together.
What is included in the mold price and acceptance arrangement?
The quotation should identify the agreed tooling, related equipment and services, together with any sample, trial and acceptance arrangements. Review the itemized scope before ordering.
Need the machine and mold reviewed as one project?
Discuss a complete paint bucket project